DKDP Potassium Dideuterium Phosphate Pockels cell or KD*P Pockels cell is a Pockels cell device with relatively excellent comprehensive performance. Potassium diduterium phosphate DKDP (KD*P) crystal has the advantages of low optical loss, high extinction ratio, good electro-optic performance and good environmental tolerance. It uses its longitudinal effect to make an electro-optic Q-switched switch, which is suitable for pulsed solid- state lasers It is usually used in the fields of laser cosmetology and laser medical treatment under low repetition rate conditions .
Product Description
The deliquescence and mechanical properties of DKDP crystal itself are poor. When using it, please pay attention to the following operating environment: temperature operating range: 10~50 degrees, temperature change should not exceed 5 degrees every 20 minutes, ambient humidity: <40%, Try to use it with a humidity control device (drying vessel and desiccant), and store it in a dry box when not in use.
Note: Since the quarter-wave voltage and half-wave voltage required by the DKDP Pockels cell are related to temperature, at a wavelength of 1064nm, the law of the quarter-wave voltage changing with temperature is that the temperature increases by 1ºC, so A quarter-wavelength voltage rise of approximately 50V is required. That is, dV/dT is about +50V/ºC.
Typical application
Dye laser 800nm double, triple frequency and 1064nm double, triple, quadruple frequency
electro-optic modulation , electro-optic Q-switching high-speed camera switch
Product Specifications DKDP single crystal Q switch
Product number | Clear Aperture(mm) | Crystal size (mm) | Shell size (mm) | Damage Threshold@10ns 10Hz 1064nm | Electrode method |
OCP-8-1926-32K-5-2 | 8 | D8x16 | D19x26 | 350MW/cm 2 | Cylindrical pin electrodes |
OCP-8-1926-32K-5-2-SG | 8 | D8x16 | D19x26 | 750MW/cm 2 (Sol-gel coatings) | Cylindrical pin electrodes |
OCP-8-2028-32K-5-2 | 8 | D8x16 | D20x28 | 350MW/cm 2 | Cylindrical pin electrodes |
OCP-8-1930-32K-5-2 | 8 | D8x16 | D19x30 | 350MW/cm 2 | Terminal leads |
OCP-8-1928-32K-5-2 | 8 | D9x18 | D19x28 | 350MW/cm 2 | End pin electrodes |
OCP-10-2532-32K-5-2 | 10 | D10x20 | D25x32 | 350MW/cm 2 | Cylindrical pin electrodes |
OCP-12-3236-32K-5-2 | 12 | D12x20 | D32x36 | 600MW/cm 2 | End pin electrodes |
OCP-12-3240-32K-5-2 | 12 | D12x20 | D32x40 | 350MW/cm 2 | Cylindrical pin electrodes |
OCP-12-2540-32K-5-2 | 12 | D12x20 | D25x40 | 350MW/cm 2 | Cylindrical pin electrodes |
OCP-15-3542-32K-5-2 | 15 | D15×20 | D35×42 | 350MW/cm 2 | Cylindrical pin electrodes |
λ/4 voltage (@ 1064 nm), kV DC: 3.2kV; capacitance: 5pF; wavelength: 1030nm-1064nm; extinction ratio: 1000:1 | |||||
Transmittance: >98.5%; OCP-8-1926-32K-5-2-SG transmittance: >98% |
DKDP Dual Crystal Q Switch
Product number | Clear Aperture(mm) | Crystal size (mm) | Shell size (mm) | Damage Threshold@10ns 10Hz 1064nm | Electrode method |
OCP-12-3565-16K-8-2 | 12 | D12x20 | D35x65 | 350MW/cm 2 | Cylindrical pin electrodes |
λ/4 voltage (@ 1064 nm), kV DC: 1.6kV; Capacitance: 8pF; Use wavelength: 1030nm-1064nm; Extinction ratio: 500:1; Transmittance: >97.5% |